發布時間：2021-08-10

今年的廣州展會，恒坤的麒麟大轉盤非常搶眼，引來眾多游客圍觀，不僅僅是因為這種史無前例的展示方式，更是因為麒麟光學平臺真正意義上的幫助客人解決眾多痛點。

At this year’s Guangzhou lighting exhibition, Hengkun’s Kirin Turntable was very eye-catching and attracted many visitors, not only because of this unprecedented display method, but also because the Kirin Optical Platform really helped customers solve many pain points.

當然，除了展示的樣品以外，恒坤也針對平臺上的不同系列產品，分別做了不同形式的燈光演示。

Certainly，in addition to the samples shown, HengKun also for different products on the platform were made in different forms of lighting demonstration.

展會之后，很多客人都聯系我們，咨詢關于麒麟平臺的產品信息。所以小編整理一下思路，系統為大家講解一下關于麒麟平臺的相關信息。

很多朋友都有這樣的疑問：恒坤為什么要開發麒麟光學平臺？

眾所周知，做專業的光學透鏡，從研發到模具再到生產，每開發一個產品，這種完整的工業鏈是必備條件。

After the exhibition, many guests contacted us to inquire about the product information of Kirin platform. So I sorted out my ideas, and systematically explained the relevant information about the Kirin platform. Many friends have this question: Why did Herculux develop the Kirin optical platform?

As we all know, this complete industrial chain is a prerequisite for every product we develop from R&D to molds to production of professional optical lenses.

從圖片的麒麟大轉盤可以看到，這個平臺上的產品是非常多的，恒坤之所以耗費大量的時間，人力，財力去開發這個平臺，為的就是幫助客人解決問題，節約成本。

As you can see from the Kirin turntable in the picture, there are many products on this platform. The reason why we spends a lot of time, manpower and financial resources to develop this platform is to help customers solve problems and save costs.

麒麟光學平臺的開發，幫助客人解決了以下痛點：

一：蜂窩孔散熱器現象 Radiator honeycomb hole

由于設計師或者終端客人要求變更光學效果，需要更換光源或者透鏡，避免不了光源支架的更換，導致散熱器上需要針對不同的支架進行打孔，最終散熱器上出現若干對螺絲孔，安裝和定位極其不方便，工廠的生產裝配效率也受影響。

As designers or terminal customers require changes in optical effects (COB, lens, COB holder), which will result in the need to perforate different brackets on the radiator. That will lead to the punch holes for different holder on the heat sink. Finally several pairs of screw holes appear on the radiator, which is extremely inconvenient for installation and positioning, the production and assembly efficiency of the factory is also affected.

二：免焊支架適配性差The solder-free holder has poor adaptability

這個現象，國外的客人比較容易遇到，常規的光學，無法跟BJB等免焊支架進行裝配，而且可焊線的支架也無法與之互換，導致一些做出口燈具的客戶，需要針對免焊支架單獨設計散熱器和燈具，造成重復開發投入。

This problem may be more common for foreign customers. Conventional optics cannot be assembled with solder-free holder such as BJB.Further more, the solderable holder can not be interchanged with it. This has caused some customers who are exporting lamps to design radiators and lamps separately for solder-free holder, causing repeated development investment.

三：深防眩效果差 Bad deep anti-glare effect

有些燈具即使做了防眩結構，由于透鏡本身防眩處理不好，導致整個燈具非常依舊刺眼。

Some lighting are still very dazzling even if they are made of anti-glare structure cause the lens itself is not handled properly.

四：深防眩洗墻光斑分層 Deep anti-glare wall washing spot layering

為了做更好的防眩效果，燈具廠家不得不加更深的防眩罩，防眩效果有了，但是偏光洗墻的時候，光斑出現分層，不均勻等現象。

In order to do a better anti-glare effect, lighting manufacturers have to more focus on deeper anti-glare shield, anti-glare effect achieved but polarized wall wash when delamination spots, uneven and other problems.

五：光學互換性差 Bad Optical Interchange

常規的透鏡，由于定位方式，安裝結構等因素，導致不同應用的光學透鏡，無法進行一比一互換。當設計師需要快速看到其他應用的效果時，燈具廠家需要針對不同的透鏡，不斷的調整燈具結構，非常的麻煩。

Conventional lenses cannot be interchanged pin-to-pin for optical lenses of different applications due to factors such as positioning method and installation structure. When designers need to see the effects of other applications when designing, the luminaire manufacturer needs to respond quickly to continuously adjust the structure of the luminaire for different lenses, which makes the factory very troublesome.

以上的現象，您在燈具開發過程中是否也曾遇到過并且為之煩惱呢？恒坤光電推出的麒麟光學互換平臺，不僅統一了光源支架，更是推出7大系列光學，從深防眩、變色溫、低眩、超薄、透鏡與反光杯互換、變焦等等多個方向進行開發，再加上配套的全系列變光片和各種防眩罩，急客戶之所急，全新打造麒麟光學互換光學平臺，完美解決以上幾大應用痛點！

上一篇： 無

下一篇： 麒麟光學平臺為啥這么受歡迎（下）？